Beam Splitting Top Adjust Mounts are ideal for use in compact spaces. The back side of these mounts has been scalloped out to allow a larger clear aperture for transmitted beams. They give you easy access to both tip and tilt adjustments from the top without worrying about blocking the beam. Top- and side-mounting schemes are compatible with post and pedestal mounting systems.
| Compare | Model | Drawings, CAD & Specs | Availability | Price | |||
|---|---|---|---|---|---|---|---|
|
9775 Mirror Mount, Pint-Sized, 0.5 in. Diameter, 2 Knob Top Adjust |
In Stock
|
$193.00 |
|
|||
|
9775-K Mirror Mount, Pint-Sized, 0.5 in. Diameter, 2 Allen-Key Top Adjust |
In Stock
|
$193.00 |
|
|||
|
9774 Mirror Mount, Top Adjust, 1.0 in. Diameter, 2 Knob Adjustment |
In Stock
|
$196.00 |
|
|||
|
9774-K Mirror Mount, Top Adjust, 1.0 in. Diameter, 2 Allen-key Adjustment |
In Stock
|
$196.00 |
|
The back side of these mounts has been scalloped out to allow a larger clear aperture for beam splitting applications.
Top adjust mounts have their adjustment screws located above where the optic is held so that your hands never have to cross into the beam path area.
These mounts feature alignment pin holes (shown in red) on the bottom (base) of the mount to enable keying of the position and orientation by means of dowel pins when directly mounting. (Note: Dowel pins not included with mount.) This is especially helpful in OEM applications.
Hex-driven locking screws are available to lock the position of the optic in place for long term stability and to prevent unintended adjustments.
All Beam Splitting Top Adjust Mounts can be mounted sideways via an 8-32 (M4) clearance hole (9774) or an 8-32 threaded hole (9775) to allow them to fit into areas with height restrictions. This is also useful if the actuators need to be accessed from the side rather than the top.
Ultra-High Velocity