Goniometric stages rotate an object about an axis, which is unobstructed by the stage itself, located over the center of the top platform. Like-sized GON Series stages can be stacked. In a stacked configuration, the axes of rotation will intersect with each other for orthogonal motion about a common point in space.
| Compare | Model | Drawings, CAD & Specs | Availability | Price | |||
|---|---|---|---|---|---|---|---|
|
GON40-L Goniometric Stage, Lower, ±5°, 1.57 x 1.57 x 0.79 in., 6-32 & 1/4-20 |
2 Weeks
|
$304.00 |
|
|||
|
GON40-U Goniometric Stage, Upper, ±5°, 1.57 x 1.57 x 0.79 in., 6-32 & 1/4-20 |
|
$304.00 |
|
|||
|
GON65-L Goniometric Stage, Lower, ±5°, 2.56 x 2.56 x 1.18 in., 6-32 & 1/4-20 |
5 Weeks
|
$854.00 |
|
|||
|
GON65-U Goniometric Stage, Upper, ±10°, 2.56 x 2.56 x 1.18 in., 6-32 & 1/4-20 |
In Stock
|
$854.00 |
|
|||
|
|
M-GON40-L Goniometric Stage, Lower, ±5°, 40 x 40 x 20 mm, M3 & M6 |
In Stock
|
$304.00 |
|
|||
|
|
M-GON40-U Goniometric Stage, Upper, ±5°, 40 x 40 x 20 mm, M3 & M6 |
In Stock
|
$304.00 |
|
|||
|
|
M-GON65-L Goniometric Stage, Lower, ±5°, 65 x 65 x 30 mm, M3 & M6 |
In Stock
|
$854.00 |
|
|||
|
|
M-GON65-U Goniometric Stage, Upper, ±10°, 65 x 65 x 30 mm, M3 & M6 |
In Stock
|
$854.00 |
|
| Models |
GON40-L |
GON40-U |
GON65-L |
GON65-U |
|---|---|---|---|---|
| Stage Type | Lower Goniometric | Upper Goniometric | Lower Goniometric | Upper Goniometric |
| Angular Range | -5 to +5° | -5 to +5° | -5 to +5° | -10 to +10° |
| Graduations | 1° | 1° | 1° | 1° |
| Platform Size | 40 x 40 mm | 40 x 40 mm | 65 x 65 mm | 65 x 65 mm |
| Load Capacity | 22 N | 22 N | 45 N | 45 N |
| Height | 20 mm | 20 mm | 30 mm | 30 mm |
| Rotation Axis Height 1 | 35 mm | 15 mm | 80 mm | 50 mm |
| Thread Type 2 | 6-32 and 1/4-20 | 6-32 and 1/4-20 | 6-32 and 1/4-20 | 6-32 and 1/4-20 |
Like-sized GON Series stages can be stacked. In a stacked configuration, the axes of rotation will intersect with each other allowing for rotation that is not restricted to a plane but is truly spherical. The motion on both goniometers can be securely locked using a hex screw on the side of the goniometer.
GON Series Goniometric Rotation Stages utilize an actuator-driven rather than a worm screw-driven design to allow actuator interchangeability. This allows a variety of actuators such as adjustment screws, differential micrometers, or motorized actuators to be used with these stages. Shown is a TRA25 actuator motorizing a GON65-U goniometer.
The GON Series Goniometric Stages are compatible with RS Series Rotation Stages and DS Series Linear Stages of matching size (for example, GON40 with DS40, GON65 with DS65). They can be combined to provide multi-axis motion and can be easily adapted to fit a specific system's needs. A six-axis manual positioning system is shown using matched 65 x 65 mm stages.
Ultra-High Velocity